CoreEL & Stratasys jointly participated as Platinum Sponsor in SOLIDWORKS Launch 2017 – Innovation day 2016 Event for Engineering Community, conducted by EGS Computers India Pvt., Ltd. for SolidWorks 3D CAD Mechanical Design Software Launch. This event took place at 4 major South Indian locations Chennai, Coimbatore, Trichy and Pondicherry. Stratasys 3D printed demo models...
IBC is the premier annual event for professionals engaged in the creation, management and delivery of entertainment and news content worldwide. It was held this year at RAI, Amsterdam between 9th to 13th September 2016. Stagebox was one of the highlight at IBC as part of the IP Interoperability...
CoreEL is participating in Embedded Systems Conference 2016 (ESC 2016), a premier meeting place for programmers, engineers, designers, and analysts from the embedded systems domain. CoreEL Technologies is showcasing: 1. EDA Tools Modeling, Simulation, Analysis and Code Generation PCB Design and Simulations FPGA/ASIC Design & Verification Solutions 2. Real Time Operating Solutions 3. 3D Printing...
A 5-day Faculty Development Program on “FPGA Design Flow with Vivado and 7-series boards” was held from 6th September to 10th September 2016 at CoreEL Technologies, Bangalore office. The program was attended by faculty and research scholars from institutes and universities across India, including IIT-Indore, NITs, JNTUA, University of Calcutta, Mumbai and VTU. The faculty...
CoreEL and ANSYS collaboratively conducted the BEL Tech Day at Movenpick Hotel on 19th Aug 2016. It was a focused technical event for Mechanical Engineers who are responsible for Design, Development, Structural and Thermal stability of Electronics system at the various divisions of BEL. The theme of the event was “TURN ON your design efficiency...
CoreEL is conducting a 3 day Workshop on ASIC and FPGA design flow On 28, 29 and 30th September, 2016 at Gujarat Technological University. Click the below link to register: (Free Registration) REGISTER
CoreEL is conducting 2 Days workshop on “EMBEDDED SYSTEM ON ZYNQ USING VIVADO TARGETTING ZYNQ ARCHITECTURE” in Kumaraguru College of Technology, Chinnavedampatti – Coimbatore on 28th and 29th July 2016.
CoreEL participated in the Strategic Electronic Summit (SES) – 2016, at Bangalore International Exhibition Centre (BIEC) on July 7th and 8th 2016, to share the latest tools and technologies in Electronic Design Automation(EDA) and Engineering Simulation. The uPrint SE Plus 3D printer from Stratasys was showcased at the CoreEL booth, to announce the addition of 3D printing solutions to its portfolio.
CoreEL Technologies is conducting a two day workshop on ‘System Design flow using Zynq’ , at Pimpri Chinchwad College of Engineering (PCCOE), Pune, on 28th to 29th June 2016
Workshop on “Recent Trends in VLSI & Embedded System Design using Xilinx Zynq-7000 & Mentor Graphics EDA Tools “
CoreEL Technologies is conducting a three day workshop on the ‘Recent Trends in VLSI & Embedded System Design using XILINX Zynq 7000 and Mentor Graphics EDA tools’ , at Shri Madhwa Vadiraja Institute of Technology & Management at Bantakal,UDUPI -Karnataka, on 11th to 13th July 2016
CoreEL’s University Solutions team is conducting a Workshop on Embedded System Development using ARM and Xilinx boards on June 9th and 10th at B.S.Abdur Rahman university, Chennai.
The CoreEL Offsite Meet was held on the 17th and 18th of May 2016 at Clarks Exotica Resort in Bangalore. The theme of the event was “Growth by Innovation and Self Development” and was attended by 60+ senior employees.
CoreEL is conducting a Seminar on “System Design Using MATLAB, Simulink and VIVADO System Generator” on 17th June 2016 (Friday) between 9am – 5pm at Central Avenue Hotel, Kannur (Kerala)
Two days Workshop on “ASIC Design Flow Using Mentor Graphics Tools” on 9th – 10th JUNE 2016. Organized by Department of Electronics and Communication Engineering Amritsar College of Engineering and Technology, Amritsar (Punjab) Register Online
Two days Workshop on “FPGA Design Flow using Xilinx Vivado Design Suite on Zynq-7000 SoC Kit” and Analog Discovery Board
CoreEL is conducting Two days Workshop on “FPGA Design Flow using Xilinx Vivado Design Suite on Zynq-7000 SoC Kit” and Analog Discovery Board, on 7TH TO 8TH JUNE 2016 at Amritsar College of Engineering and Technology, Amritsar Online Registration
Charu Hashi Rena and Arun John Mathias represented CoreEL at a 2-day workshop conducted by Golden Valley Integrated Campus in Madanapalle, AP. In this session, Charu gave an insight into the evolution of the VLSI industry, the ASIC and FPGA flow, the typical FPGA architecture and concluded with a demo on an FPGA board. Arun...
Truechip Solutions Pvt. Ltd., a Noida-based leading provider of Design and Verification solutions, recently conducted an exclusive campus recruitment drive for students of Sandeepani. The drive began with a Pre-placement talk and was followed by a written test. Shortlisted candidates were interviewed by a panel led by Mr. Nitin Kishore, CEO of Truechip Solutions.
Workshop on CMOS Digital IC Design using Mentor Graphics EDA tools is being conducted at Aditya Engineering College, Aditya Nagar, ADB Road, Surampalem-533437.
ISTE Student Chapter, in association with the department of E&C Engineering, conducted a Guest Lecture on the topic “Career Awareness Program”, on 25th Feb 2016 in the college premises. Mr. Arun John Mathias from Sandeepani School of Embedded System Design, Bengaluru, delivered the lecture. All the students of the Final year & Pre Final year...
CoreEL’s Sandeepani Team delivered a seminar on “Reconfigurable Computing – From FPGAs to Hardware/ Software Co-design” on 27th Feb 2016 at MSRUAS, Peenya Campus.
MATLAB EXPO 2016 presents a unique opportunity to network with peers from across industries and MathWorks experts, and to learn how MATLAB and Simulink are accelerating the pace of engineering and science. Whether you are new to MATLAB and Simulink or a proficient user, join this event to gain knowledge that you can apply immediately....
CoreEL is conducting a Workshop On “Intelligent Control Systems Using Soft Computing Methodologies with MATLAB & SIMULINK” on 10th and 11th MAR 2016 at Department of Electronics & Communication Engineering, ACE COLLEGE OF ENGINEERING TRIVANDRUM.
CoreEL’s University Solutions Team and EDA Team had attended MathWorks Kick-Off Meet at Angasana Resort on 18th & 19th of Feb, 2016.
CoreEL had conducted a Two Days Workshop On “System Design Flow on Zynq-7000 using Xilinx Vivado Design Suite” on 18th & 19th Feb, 2016 at Department of Electronics & Communication Engineering, MES COLLEGE OF ENGINEERING, KUTTIPPURAM, Kerala Speakers: Mr. Bikash. R.P (Application Engineer)
CoreEL Technologies is conducting 2 days workshop in association with CDAC, Noida. Topic: ASIC Design Flow using Mentor Graphics Tools Date: 16th & 17th February, 2016 Speaker: Mr. Ankur Sangal ( Sr. Application Engineer , CoreEL Technologies) Target Participants: Professor/Associate Professor/Assistant Professor We are inviting you to attend this workshop and make this Workshop a...
Workshop on “Application of Mathworks Products in Engineering and FPGA Design Flow on Nexys-4 DDR Board using Vivado Design Suite”
CoreEL Technologies is conducting a workshop on “Application of Mathworks Products in Engineering and FPGA Design Flow on Nexys-4 DDR Board using Vivado Design Suite” on 19th and 20th February 2016 at Navodaya Institute of Technology Raichur.
CoreEL conducted Two day National Workshop On “Xilinx Vivado Design Flow & High Level Synthesis Flow Using Zynq” on 11th & 12th Feb 2016 in K.L.N.COLLEGE OF ENGINEERING, Pottapalayam- Madurai District
Two days National level Workshop on REAL-TIME SIGNAL & IMAGE PROCESSING USING XILINX VIVADO SYSTEM GENERATOR
CoreEL is conducting two days National level Workshop on “REAL-TIME SIGNAL & IMAGE PROCESSING USING XILINX VIVADO SYSTEM GENERATOR” in K S R INSTITUTE FOR ENGINEERING AND TECHNOLOGY, Tiruchengode on 25th & 26th, February 2016.
CoreEL Technologies is Sponsoring for IISC fest “Pravega” 2016. CoreEL will setup a stall on 29th Jan 2016 to bring awareness among Students and Faculties about various Training Courses that CoreEL is Offering through SANDEEPANI which is the Training Arm of CoreEL Technologies.
CoreEL had participated in “INTERNATIONAL MICROWAVE AND RF CONFERENCE – IMaRC 2015” which was held in Hyderabad on Dec 10th, 11th & 12th 2015. CoreEL had setup a booth which showcased the products like: VPX Quad PowerPC 8640 Signal Processor, Digital Baseband Generator, Dual Transmit/Receive Module. Senior Vice-President of Engineering dept. Mr. T.S.N. Murthy presented...
Two days Workshop on “System Design Flow using Xilinx Vivado Design Suite on Zynq-7000 SoC Kit” at Dr. Mahalingam College of Engineering and Technology Pollachi, on 27th & 28th January 2016.
University Solutions team from CoreEL Technologies is conducting a Tutorial program on “Advanced ZYNQ-7000 SOC Architecture and ADC with Vivado” during “2nd International Conference on VLSI Systems, Architecture, Technology & Applications” to be held at Amrita Vishwa Vidyapeetham University, Bangalore on 10th Jan 2016 from 9 am to 4:30 pm. http://web-blr.amrita.edu/vlsi_sata/tutorials.htm
CoreEL in collaboration with IIT Madras had conducted Two Days Hands-on Workshop on “System design on Zynq Using SDSoC” in IIT, Chennai on January 2nd -3rd, 2016. Participants from around 17 different Institutions and research scholars from IIT Madras had attended the Workshop.
CoreEL wins the “CII Industrial Innovation Awards 2015” CoreEL Technologies has been declared the winner of the most prestigious “CII Industrial Innovation Awards 2015” for two categories 1) One of the top 25 Innovative companies in India 2) Most Innovative Company in MSME Manufacturing sector This is indeed a very a proud moment for all...
CoreEL Technologies, Premier Xilinx Alliance Program Member. “CoreEL’s H.264/AVC 4:2:2 10-bit 1080p60 decoder IP core has been licensed to a number of customers for various applications. Complexity of this IP demanded high levels of performance from FPGA tools. The Vivado tools provided us significant gains in runtimes and yielded more compact floorplans compared to earlier...
The 6th Strategic Electronics Summit 2015 (SES 2015) was organized by ELCINA on 30th & 31st July, 2015 at Bangalore International Exhibition Centre (BIEC), Bengaluru. With over 200 organisations participating, the event was focused on Defence and Aerospace.
MathWorks India held its annual conference, MATLAB EXPO 2015, on April 23 and April 28 in Bangalore and Pune. CoreEL extended its support to its partner Speedgoat by participating in this event and showcasing the New Speedgoat real time simulation and testing machine.
CoreEL Technologies was a part of the NAB Show, held at Las Vegas, Nevada, USA during April 13 – April 16, 2015. This event received participation from over 159 countries with more than 103,042 registrations.
The NPOL Industry Meet 2015 (NIM-2015) was conducted in Kochi on January 08 and January 09, 2015. The event was designed to serve opportunities for industries and shipyards in domestic and global markets through Sonar Systems and ToT partnerships. In this event, CoreEL engineers served an audience comprising of scientists and defence industry delegates.
CoreEL Technologies participated in the Second International Conference on Transformations in Engineering Education ICTIEE, which was held during January 05-08, 2015 in BMS College, Bengaluru. CoreEL’s technical experts conducted a workshop on Advanced FPGA systems and Computational Fluid Dynamics.
The 28th International Conference on VLSI Design (VLSID2015) and 14th International Conference on Embedded Systems was held between January 03 – January 07, 2015 in Leela Palace, Bengaluru. The training arm of CoreEL – Sandeepani School of Embedded system design showcased their specialized courses on embedded system design and VLSI technologies for Students, Faculty and Corporate.
During December 17 – 19, 2014, CoreEL Technologies participated in the International Conference on Computational Methods in Engineering & Health Sciences, which was conducted at the MIT College, Manipal.